Motors |
N/A Class I, Groups C, D; Class II, Groups F, G |
EX Plugs |
N/A Class I, Div. 1&2, Groups B, C, D; Class II, Div. 1&2, Groups F, G |
Length |
N/A 19 in48.2 cm |
Width |
N/A 22 in55.8 cm |
Height |
N/A 22-1/2 in57.1 cm |
Weight |
N/A 79 lb35.8 kg |
Free Air |
N/A 6468 ft³/min10989 m³/h |
One 90 Degree Bend |
N/A 4314 ft³/min7330 m³/h |
Two 90 Degree Bends |
N/A 3922 ft³/min6664 m³/h |
Note for Flow Rate |
N/A Air flow determined at 60 Hz |
Power |
N/A 1-1/2 hp |
Certifications |
N/A Canadian Standards Association (CSA) Certified Underwriter Laboratories (UL) Listed |
Voltage |
N/A 115 V |
Alternating Current (AC) Voltage |
N/A 208 to 230 V |
Frequency |
N/A 60 Hz |
Speed |
N/A 3450 rpm |
Current Draw |
N/A 8.4 to 7.7 A15.4 A |
Protection |
N/A Thermal, Automatic Reset |
Construction |
N/A
|
Accessories |
N/A
|
N/A When using statically conductive ducting, the integrated grounding wire must be properly grounded to the blower chassis OR linked to any additional grounding wire or duct used (as shown). Refer to User Manual for detailed instructions. |