M2A Stand-Alone Explosion Proof Transmitters On Jorgensen & Co.

The RKI M2ATM is a state-of-the-art transmitter that can operate as an independent, stand-alone monitor or as part of an integrated system. The M2A connects with an analog or digital signal to virtually any controller, PLC, or DCS. Setup procedures are simplified with user friendly push buttons and OLED menus. It utilizes a magnetic wand technique for performing non-intrusive calibration. The M2A provides an automatic zero drift correction feature, which results in more stable readings and reduces the need for adjustments due to sensor aging.

Item #	Number of Wires to Controller	Maximum Distance to Controller at 18 American Wire Gauge (AWG) Wire	Maximum Distance to Controller at 16 American Wire Gauge (AWG) Wire	Maximum Distance to Controller at 14 American Wire Gauge (AWG) Wire
M2A Transmitter	N/A 3	N/A 2500 ft	N/A 5000 ft	N/A 8000 ft

N/A 2500 ft

N/A 5000 ft

N/A 8000 ft

Item #

Number of Wires to Controller

Maximum Distance to Controller at 18 American Wire Gauge (AWG) Wire

Maximum Distance to Controller at 16 American Wire Gauge (AWG) Wire

Maximum Distance to Controller at 14 American Wire Gauge (AWG) Wire