- Specifications
- Packaging
- Operating Environment
- Controls
- Direct Interface with Beacon 110 / 200 / 410A / 800 Controllers M2A Wiring Matrix
- Features
- Additional Information
Brands |
N/A RKI Instruments |
Gas Detected |
N/A Ammonia (NH3) Arsine (AsH3) Carbon Dioxide (CO2) Infrared (IR) Carbon Monoxide (CO) Chlorine (Cl2) Chlorine Dioxide (ClO2) Hydrocarbons (HC ) Infrared (IR) Hydrogen (H2) Parts per Minute (PPM) Hydrogen Cyanide (HCN) Hydrogen Sulfide (H2S) Lower Explosive Limit (LEL) General Purpose Lower Explosive Limit (LEL) Hydrogen (H2) Specific Methane (CH4) Infrared (IR) Oxygen (O2) Phosphine (PH3) Sulfur Dioxide (SO2) |
Sensors |
N/A Catalytic Electrochemical (EC) Galvanic Cell Infrared (IR) Metal Oxide Semiconductor |
Housing J-Box |
N/A Cast Aluminum, Explosion-Proof |
Housing Sensors |
N/A Plastic or Aluminum |
Output Signal |
N/A 4 to 20 mA |
Approvals |
N/A CUnderwriter Laboratories (UL) US Canadian Standards Association (CSA) Canadian Standards Association (CSA) NRTL Underwriter Laboratories (UL) |
Controllers |
N/A Compatible with the following controllers: Beacon 110, Beacon 200, Beacon 410A, and 800, also PLC and DCS systems |
Material Warranty |
N/A 1 year |
Workmanship Warranty |
N/A 1 year |
Available Accessories |
N/A AC Power Supply Calibration Adapters Calibration Kits Data Loggers Flow Through Adapters Remote Horns and Lights Remote Mount Calibration Adapters Splash Guards |
Package Type |
N/A Each |
Units Per Package |
N/A 1 |
Location |
N/A Indoor Class I, Div. 2 |
Non-Condensing Relative Humidity |
N/A 0 to 99 % |
Zero Controls |
N/A Sets transmitter output to 4 mA with zero output from sensor |
Span Controls |
N/A Sets transmitter output to 20 mA with full scale output from sensor |
Direct Interface with Beacon 110 / 200 / 410A / 800 Controllers |
N/A
Number of Wires to Controller 3 Maximum Distance to Controller (18 AWG wire) 2500 ft Maximum Distance to Controller (16 AWG wire) 5000 ft Maximum Distance to Controller (14 AWG wire) 8000 ft |
N/A
|
N/A
The toxic sensors are electrochemical type plug-in sensors, which provide high specificity, fast response, and long life. The plug-in design allows quick replacement in the field with no tools required. Toxic sensors are designed for use in Class I, Div. 2 hazardous locations. Sensors available for NH3, AsH3, Cl2, ClO2, HCN, PH3, and SO2. |