Gas detection should not be complicated. The Beacon™ 110 is gas detection simplified.
The Beacon™ 110 is a powerful, low cost fixed system controller for one point of gas detection. It is microprocessor controlled, simple to install and operate, and priced to be the industry’s best value single gas detection controller. It is capable of accepting RKI sensors directly for LEL level combustibles, oxygen, CO2, and toxic gas sensors.
- Specifications
- Packaging
- Dimensions
- Physical
- Power Supply
- Environmental
- Inputs
- Outputs
- Features
- Applications
- Additional Information
- Note
Brands |
N/A Beacon™ RKI Instruments |
Approvals |
N/A Canadian Standards Association (CSA) Certified to CSA C22.2 No. 61010-1-04 and Underwriters' Laboratories (UL) 61010-1 |
Material Warranty |
N/A 1 year |
Workmanship Warranty |
N/A 1 year |
Industry Standards/Certifications |
N/A CCSAUS |
Package Type |
N/A Each |
Units Per Package |
N/A 1 |
Height |
N/A 8.5 in216 mm |
Depth |
N/A 7.0 in178 mm |
Width |
N/A 4.3 in109 mm |
Enclosure |
N/A Wall Mounting Gray Fiberglass with Hinged Cover |
Conduit Connection |
N/A 3/4" NPT Conduit Hubs, 2 Provided. 1 for Sensor Wiring and 1 for Power and Relay Wiring. |
Wiring Termination |
N/A Screw Type Terminal Block, 14 Gauge Maximum |
Controls |
N/A 3 Internal Push Buttons for Setup, Programming, and Calibration. 1 External push button for alarm reset. |
Universal Alternating Current (AC) Voltage |
N/A 115 V220 V |
Nominal Direct Current (DC) Voltage |
N/A 24 V |
Note for Power |
N/A Battery Backup Option Available |
Operating Temperature |
N/A -20 to 50 ºC-4 to 122 ºF |
Storage Temperature |
N/A -20 to 70 ºC-4 to 158 ºF |
Enclosure Rating |
N/A NEMA-4X Enclosure, Chemical, and Weather Resistant. Suitable for Indoor and Outdoor Installations. |
Direct Wired Sensors |
N/A LEL, Oxygen, Carbon Dioxide, and Toxic Gas Sensors. Amplifier not Required for Less Than 500 Feet |
4 to 20 Milliampere (mA) Sensors |
N/A Accepts any 4 to 20 mA transmitter (24 VDC, 2 or 3 wire). A wide variety of RKI/Riken sensors are available with 4 to 20 mA signals. Wiring distances up to 8,000 feet |
Sampling Methods |
N/A Diffusion and Sample Draw Heads Available. |
Relays |
N/A Three relays - 10 amp rating (at 115 VAC), SPDT isolated contacts. 2 relays for gas alarms and 1 trouble relay. Relays fully programmable for: increasing or decreasing alarm, latching or self reset, normally energized or normally de-energized, time delay |
4 to 20 Milliampere (mA) Output |
N/A Signal Output, 4 to 20 mA (Maximum Load Impedance 500 ohms), per Channel. |
24 Direct Current (DC) Voltage Output |
N/A 24 VDC (400 mA max) Output Provided to Operate Sample Drawing Adapters or Other Accessories. |
Display |
N/A 2 x 8 Alphanumeric Display with Backlighting |
Audible |
N/A Built-in Audible Alarm, 94 dB, Mounted on Enclosure Coded Output: Pulsing = Gas Alarm, Steady = Fail |
Visual |
N/A 3 Light Emitting Diode (LED) on the Front Cover for Alarm Status Indication, and Malfunction. Optional Top-mount Strobe. |
N/A
|
N/A
|
N/A
The Beacon™ 110 can also accept any 4 to 20 mA transmitter (2 or 3 wire, 24 VDC). Sensors can be mounted directly at the Beacon™ 110 housing, or can be wired remote from the controller. |
N/A
Specifications subject to change without notice. |