The need for BUMP Testing

The aim of the bump test is to make sure a gas monitor is working at its optimum by briefly exposing the unit to a known concentration of the target gas. The reading is compared to the actual quantity of gas present, as stated on the test gas cylinder, and if the detector goes into alarm within an acceptable range of the actual concentration, usually within 10%, then it is working safely. If the bump test results are not within the acceptable range, or it takes more than 30-40 seconds to alarm, the gas detector must not be used until a full calibration has been conducted.

Please remember, however frequently you bump test, this does not remove the need to have gas detectors inspected, calibrated and serviced periodically by a competent individual. Contact Jorgensen today to get more information about how we can provide for your calibration and testing needs.

3M™ Versaflo™ TR-300+ Powered Air Purifying Respirator

Jorgensen is a leading provider of personal protective equipment, including powered air purifying respirators (PAPRs) for which demand has recently exceeded supply due to the COVID-19 pandemic.

Jorgensen has partnered with 3M to have available to stock of TR-300+ Series PAPRs.At this time, we are proud to announce that we expect to deliver TR-300+ PAPRs and relevant components at significantly increased capacitylevels within standard, five to seven day lead times. Over the course of this pandemic, situations have been known to change rapidly and may do so again. Now is the time to engage with your Jorgensen Representative. Call us today at 1.800.481-3473 or email sales@jorgensenco.com

Portacount Fit Testing – The highest level of protection.

Quantitative Respirator Fit Testing. The Highest Level of Protection.

In many of today’s workplace environments, a respirator and a proper respirator fit test are critical components of employee respiratory protection.

Fire service and law enforcement employees, as well as industrial companies and healthcare professionals have come to depend on properly fitting respirators for protection from respiratory hazards, such as chemical and environmental hazards, as well as airborne biohazards.

When implemented correctly, a respirator fit testing program can help ensure that the highest respiratory protection levels are achieved through a properly sized and donned respirator.

Easy, Accurate, and Repeatable

PortaCount® respirator fit testing equipment measures real-time fit while the user simultaneously performs a series of moving, breathing and talking exercises designed to simulate the same movements made in the field. With step-by-step guidance, the instrument walks you through the fit test.

Once the fit test is complete, it is easy to generate reports. The test results load into a database for retrieval and regulatory compliance.

Total Mask Testing Solutions

From quantitative fit testing equipment to mask integrity testing equipment, TSI helps you comply with regulated standards to ensure your workers’ respiratory safety.

Passing a real-time quantitative respirator fit test proves that the face piece is sized and donned correctly, as well as provides for valuable opportunity for training. The PortaCount Respirator Fit Tester can test all types of respirators, including N95 filtering face piece respirators.

Testing mask integrity helps identify leaks and ensure the proper functioning of a face piece. The Mask Integrity Test Accessory (MITA), in tandem with the PortaCount Respirator Fit Tester, tests full-face respirators and chemical, biological, radiological and nuclear defense (CBRN) gas masks.

8″ Axial AC Plastic Mini-Pak Blower

8″ Axial AC Plastic Mini-Pak Blower

Introducing our…9532 SERIES MINI-PAK BLOWERS…the NEW industry leader in size and weight! At over 30% shorter and 25% lighter than our 9533 series blowers (the previous industry leader), our ventilation blowers continue to get lighter and more compact without sacrificing any of the performance qualities you’ve come to rely on from an Allegro blower!
Our Mini-Pak blowers store the ducting inside the corrosion-, UV-, and chemical-resistant polyethylene housing for an all-in-one unit for ease of operation, transportation, and storage!