Our Safety and Compliance Testing Services
Since 1932, Jorgensen Co. has been the San Joaquin Valley’s premier provider of total fire protection and safety solutions. We offer many workplace safety and compliance testing services uniquely designed to help businesses protect employees from hazardous conditions. Our on-site solutions support commercial, municipal, and industrial clients, and are aligned with the following regulatory standards:
- ANSI: American National Standards Institute.
- EPA: Environmental Protection Agency.
- ISEA: International Safety Equipment Association.
- OSHA: Occupational Safety and Health Administration.
- NFPA: The National Fire Protection Association.
From managed inventory to gas detection to PPE management, and beyond, the experienced team at Jorgenson Co. can help you develop a proactive risk management program that significantly reduces workplace safety incidents.
- Safety and Compliance Services
- First Aid Guidance
- Gas Detection and Inspection Analysis
- Respiratory Fit Testing Services
- SCBA Services
- EPA Method 21 Calibration Services
- Fall Protection Solutions
- Eye Wash / Safety Shower Inspections
- Hazard Analysis Services
- Electric Equipment Testing Services
- Confined Space Equipment Rentals
- Work with a Full-Service Safety Partner Today
Safety and Compliance Services
Jorgensen Co. offers products and solutions for inventory management assistance programs for safety supplies and equipment that improve supply chain visibility, reduce administrative overhead, and eliminate procurement delays. Our programs help organizations monitor essential safety supplies to avoid running short or overstocking, including on-site tracking and replenishment of supplies and materials, including:
- Compliance gear
- First aid kits
- Personal Protection Equipment (PPE)
- Eyewear
- Gloves
To ensure workplace safety equipment is available at all times, Jorgensen Co. follows ANSI/ISEA standards, helping our customers comply with all readiness requirements for emergencies and inspections.
First Aid Guidance
Jorgensen Co. provides on-site guidance for first aid stations to ensure they align with ANSI/ISEA Z308.1-2021 standards. This includes verifying supply minimums for workplace safety readiness. Our experienced technicians can conduct a one-time audit of the following areas, providing recommendations for restocking and checking on:
- Expiration Dates
- Label Integrity
- Station Contents
These assessments also help organizations stay compliant with OSHA 29 CFR 1910.151 for adequate safety supplies in the workplace.
Gas Detection and Inspection Analysis
We provide gas detection programs that include application analysis and equipment calibration to ensure compliance with EPA and OSHA guidelines. Our team will assess your monitoring needs with regard to specific gases, and provide recommendations based on current workplace conditions. Detection and inspection covers:
- Carbon Monoxide
- Hydrogen Sulfide
- Volatile Organic Compounds (VOCs)
- Toxics
- Oxygen
- Combustibles
- Many others
- Ammonia
- Carbon Dioxide
We issue summary reports and calibration certificates for serviced equipment to meet documentation requirements for permissible exposure limits, as outlined in 29 CFR 1910 Subpart Z.
Respiratory Fit Testing Services
Jorgensen Co. offers respiratory fit testing services to ensure total compliance with OSHA 29 CFR 1910.134, which defines the annual testing requirements for workers who use tight-fitting respirators. We offer both quantitative and qualitative methods using the following protocols:
- Ambient Aerosol
- Bitrex
- Irritant Smoke
- PortaCount
Our skilled technicians conduct testing at your site or in our state-of-the-art facilities, and provide user training, detailed documentation, respirator selection guidance, and test log reports. The 3M online medical evaluation platform facilitates medical clearances.
SCBA Services
Jorgensen Co. offers full-service maintenance for Self-Contained Breathing Apparatus (SCBA), including cylinder hydrostatic testing, flow testing, and regulator inspection in accordance with DOT 49 CFR 180.205 and NFPA 1852 standards.
To maintain compliance with OSHA 1910.143 and verify operational integrity, we inspect of the following equipment:
- Alarms
- Facepieces
- Pressure Gauges
Our comprehensive services support hazmat teams, industrial users, and fire departments that require dependable respiratory protection during high-risk, hazardous operations.
EPA Method 21 Calibration Services
Under the Clean Air Act and its Leak Detection and Repair (LDAR) program, the EPA requires periodic testing for volatile organic compound (VOC) leaks in industrial process equipment like valves, pumps, compressors, seals, and flanges. The leak protection procedures are known as Method 21, and specify monitoring with specialized detection instrumentation on a predetermined schedule.
Jorgensen provides calibration service for these detection devices and records results in EPA-compliant logs for traceability. The process consists of:
- Applying certified calibration gas to verify the analyzer’s linearity and precision.
- Adjusting the gas mixture to meet applicable specific leak definitions.
- Establishing a clean baseline using zero air.
- Measuring response time.
- Checking span drift.
Fall Protection Solutions
Our fall protection assessments identify workplace fall hazards, as outlined in ANSI Z359 and OSHA 29 CFR 1926 Subpart M. We will then recommend compliant solutions and inspect equipment for regulatory compliance, including:
- Anchor Points
- Body Harnesses
- Horizontal Lifelines
- Lanyards
We also offer guidance for fall rescue planning, annual inspections, and system installation planning. Our evaluations support programs for confined spaces and rooftops.
Eye Wash / Safety Shower Inspections
At Jorgensen Co., we provide testing, inspection, and maintenance for portable and plumbed safety showers and eyewash stations in accordance with ANSI/ISEA Z358.1-2014 standards. To ensure your emergency equipment functions properly during debris incidents or chemical exposures, we verify the following:
- Accessibility
- Activation Times
- Flow Rate
- Temperature
During OSHA audits, our experienced technicians tag each item and provide compliance reports.
Hazard Analysis Services
Our team collaborates with manufacturer’s representatives to conduct risk assessments and Job Hazard Analyses (JHAs) to help you find and address potential hazards. Our process aligns with recommended OSHA practices for health and safety programs, emphasizing controls and task-level evaluation. We will assess the following potential risks and offer corrective action recommendations and documentation:
- Chemical
- Ergonomic
- Physical
- Procedural
These comprehensive assessments help reduce workplace injuries, support regulatory compliance, and reinforce a strong culture of safety.
Electric Equipment Testing Services
Jorgensen Co. offers dielectric testing for electrical PPE according to F11236 and ASTM F496 standards. Testing is available for:
- Hot Sticks
- Rubber Gloves
- Sleeves
These testing services help ensure total compliance with OSHA 29 CFR 1910.137, which mandates periodic testing and inspection of insulating equipment used in high-voltage environments. We use calibrated equipment to perform visual inspections and electrical integrity testing, and issue test certifications that are valid for six months.
Confined Space Equipment Rentals
Jorgensen Co. offers rental programs for the following types of equipment for OSHA-regulated and other tasks:
- Confined Space Entry Gear/ PPE
- Fall Protection Systems
- Gas Monitors
- SCBA Units
- Ventilation Systems
All equipment is inspected, certified, and pre-calibrated for immediate deployment, supporting emergency response and short-term project needs. Equipment rental helps you reduce capital expenditures without compromising on compliance or access to high-quality safety tools and equipment.
Work with a Full-Service Safety Partner Today
Jorgensen Co. is a well-respected and trusted name in fire safety products and compliance testing services. No other company in Central California can provide the depth of service or comprehensive range of products we do. We also offer customized solutions for improving workplace safety in many industries and types of facilities, including:
- Agriculture
- Education
- Food Service Manufacturing
- Municipal
- Private Business
- Restaurant
- Retail
- Warehouse
Whether you need on-site employee training, hazardous risk assessment, compliance testing services, PPE management, first aid guidance, or managed inventory programs, Jorgensen Co. can help. We offer 24/7 emergency service, monthly and quarterly inspection programs, and automated work orders to ensure work is completed efficiently and on time.
Contact us today to learn more about our comprehensive products and services, and see why we are the most trusted name in workplace safety.
